http://www.milsurpshooter.net/topic/28971/t/M48-Failure-to-Feed-Problem.html en-us Copyright 2006, Yuku feeds@yuku.com (FeedMaster) webmaster@yuku.com (WebMaster) Fri, 08 Aug 2008 09:22:19 GMT Sat, 16 Aug 2008 18:10:26 GMT Yuku Feeds 1.0 http://blogs.law.harvard.edu/tech/rss 60 http://static.yuku.com//feed/bypass/images/button-yuku.png http://www.milsurpshooter.net/topic/28971/t/M48-Failure-to-Feed-Problem.html Yuku - free hosted forums and profiles 88 31 {pics-1.1 "http://www.icra.org/ratingsv02.html" l gen true for "http://yuku.com" r (nz 1 vz 1 lz 1 oz 1 cz 1 ) "http://www.rsac.org/ratingsv01.html" l gen true for "http://yuku.com" r (n 0 s 0 v 0 l 0 )) Search Domain q http://yuku.com/search/direct/ http://www.milsurpshooter.net/reply/167684/t/M48-Failure-to-Feed-Problem.html#reply-167684 feeds@yuku.com (PTHEIM) http://www.milsurpshooter.net/sreply/167684 Sat, 16 Aug 2008 18:10:26 GMT http://www.milsurpshooter.net/reply/167168/t/M48-Failure-to-Feed-Problem.html#reply-167168
]]> feeds@yuku.com (nothernug) http://www.milsurpshooter.net/sreply/167168 Fri, 08 Aug 2008 14:01:09 GMT http://www.milsurpshooter.net/reply/167158/t/M48-Failure-to-Feed-Problem.html#reply-167158 Thanks for the reply. I actually posted a little too soon. After posting I went and took the extractor off of my Turk Mauser bolt(its actually a German Imperial bolt on the Turk) and swapped and now it feeds and extracts fine....so a FUBAR extractor. At least after your post and my experiment, I know I can order a german extractor and be ok.

And here is the amazing part....I put the extractor from the M48 on the Turk bolt and it feeds the turk just fine. Guess I will... ]]> feeds@yuku.com (usmctop) http://www.milsurpshooter.net/sreply/167158 Fri, 08 Aug 2008 10:17:38 GMT http://www.milsurpshooter.net/reply/167156/t/M48-Failure-to-Feed-Problem.html#reply-167156 feeds@yuku.com (Bear43) http://www.milsurpshooter.net/sreply/167156 Fri, 08 Aug 2008 09:45:40 GMT http://www.milsurpshooter.net/topic/28971/t/M48-Failure-to-Feed-Problem.html
My M48 does not want to feed the rounds from the right side of the magazine. They get hung up halfway into the chamber. Under close observation, it appears the rounds from the right side are not sliding up under the extractor as they should. The rounds feed properly from the left/upper side of magazine. I tried the bolt from my 24/47 and it will feed the rounds just fine. My suspicion is the extractor is slightly bent or... ]]> feeds@yuku.com (usmctop) http://www.milsurpshooter.net/topic/28971 Fri, 08 Aug 2008 09:22:19 GMT